New Drywall, Hung and Finished Right

Basements, additions, and remodels across Silver Spring. Finished paint-ready.

☎ Call (301) 679-9193

Get a Free Estimate

Tell us about your project. Free estimates, no pressure.

Call or text now
(301) 679-9193
Serving Silver Spring and Montgomery County, MD

Get Your Free Quote

Answer a few quick questions — takes about 30 seconds.

Question 1 of 4

What does your drywall need?

Drywall installer carrying a sheet into a framed Silver Spring basement

Drywall installation in Silver Spring, done in the right order

Drywall installation in Silver Spring, MD follows a sequence. Hang the boards tight. Bed tape in every seam. Build three coats of mud. Each coat goes wider than the last. Sand between coats. Check with angled light. Then texture.

Skip a step and the wall tells on you. Seams show through paint. Corners crack. We do not skip steps.

Where we hang drywall most

Basements

Finished basements are our most common full-hang job. We use board made for damp air. We leave the right gap at the slab. See basement drywall.

Additions and remodels

New rooms need new walls that blend with old ones. We match the finish level. We match the texture. The new work disappears. See drywall texturing.

Garage conversions and new rooms

Dead space becomes living space. Fire-rated board goes where code requires it. We handle the detailing.

The finish levels, in plain English

The trade grades finish from Level 0 to Level 5. Level 0 is bare board. Level 5 is skim-coated glass. Most homes want Level 4. That is smooth enough for paint to look even. See finishing levels.

What it costs

Price follows square footage and ceiling height. It follows how much is repair versus new. Whole rooms often land in the low thousands.

A note on prices: costs go up and down. No two jobs are the same. Treat numbers here as starting points, not quotes. Your written estimate is the real number for your project.

See our drywall cost guide.

How it works: installation

A full install runs in a fixed order. We follow it on every job. The order is what makes the walls last.

Step one: measure and plan. We visit free. We measure each room. We note ceiling height and any odd angles. You get a written price for the whole job.

Step two: prep the space. Floors get covered. Vents get sealed. Furniture moves out or to the center. Dust stays in the work zone.

Step three: hang the boards. Sheets go up tight to the framing. Screws go in on schedule. Seams land on studs, never floating between them.

Step four: tape and finish. Every seam and corner gets taped. Three coats of mud go on, each wider than the last. We sand between coats.

Step five: check and texture. Angled light finds every flaw. We fix what it finds. Then we texture to match your home. The walls leave paint-ready.

What to expect on the timeline

A single room takes three to five work days. Hanging takes one day. Finishing takes the rest. Mud must dry between coats. No honest crew can rush that.

A basement or full addition takes one to two weeks. We give you the schedule at the estimate. We keep you posted as the work moves along.

You can stay in the house. We seal the work zone with plastic. The rest of your home stays clean and quiet.

When new drywall beats repair

Some walls are past repair. Water damage across a whole wall. Years of bad patch jobs. Plaster crumbling off the lath. New drywall can cost less than endless patching.

We tell you straight on the free visit. If repair is the smarter buy, we say so. We sell the right fix, not the bigger one.

Silver Spring installation notes

Basements are our most common install job in Silver Spring. They need damp-smart board and a gap at the slab. See basement drywall.

Older homes add quirks. Plaster-era ceilings can run uneven. Framing can be out of square. We have seen it all and we price for what we see.

In remodels, new walls must blend with old. We match the finish level and the texture. The new work looks original.

Questions to ask any drywall bidder

Ask what finish level the bid includes. Level 4 is the standard for homes. Some bids quote Level 3 to look cheaper. You should know which you are buying.

Ask how they handle dust. Sealed zones and daily cleanup should be standard. If a bidder shrugs at dust, keep looking.

Ask who does the finishing. The finisher decides how your walls look for the next twenty years. Ask about their experience, not just the price.

Ready when the walls are

We leave walls paint-ready. Your painter picks up from there — we time our work so paint can start right after we leave.

Call (301) 679-9193 for a free visit.

Frequently Asked Questions

How long does it take to drywall a room?

Three to five work days. One day to hang. Three coats of mud with drying between. Then sanding and texture.

Do you hang drywall horizontally or vertically?

Horizontally on walls, in most cases. Fewer seams. The finishing matters more than the direction.

What kind of drywall do you use in basements?

Board made for damp air. We leave a gap at the floor. Regular board in a damp basement grows mold.

Can you drywall over old plaster?

Sometimes. Sound, flat plaster can take new drywall right over it. Crumbling plaster comes out first.

Do I need to move out during installation?

No. We seal the work area with plastic. The rest of the house stays livable. Your routine goes on as normal.

Can you hang drywall in winter?

Yes. Mud dries fine in a heated home. We keep the work zone at normal room temperature while we finish.

What finish level should my home get?

Level 4 for most homes. Smooth under normal light. Level 5 suits high-end remodels or rooms with harsh side light.

☎ Call (301) 679-9193